The vertical centrifugal pumps IM made in resin are high efficiency pumps for fixed installations with the pump immersed directly in a tank, operated by an electric motor in direct drive (max. 3000 rpm) for rapid emptying of fluid, with a flow rate of from 16 to 75 m3/hour. The particular form of construction of this pump, in addition to not using internal mechanical seals, guarantees that any accidental leakage of the fluid is collected in the tank. The open rotor allows very dirty fluids, with an apparent viscosity of up to 500 cps at 20°C and small sized suspended solids, to be pumped with a continuous flow. The choice of the pump's composition materials allows you to determine the best chemical compatibility with the fluid and/or the environment without forgetting the correct temperature field.

Main features of the pump:

1. Executions in:

- Polypropylene

- PVDF
2. Pump immersed in tank
3. Motor can be disassembled with the pump installed
4. No welds
5. Can also be used with very dirty fluids
6. High flow rates: from 15 to 55 m3/hour

7. Motor replacement without removing the pump
8. Simple replacement of wearable bushings
9. Extreme ease of maintenance
10. Can be disassembled completely
11. Can be supplied without a motor.

Print back